The Mahi Mahi disk range also has options for rim depths from 30mm to 80mm for riders looking for either lighter weight, or greater aero benefits.
A disk-specific design allows for optimised aerodynamics while the low weight is an important part of the lively, responsive feel and streamlined performance of these wheels in all weather conditions. As with all our wheels they are handbuilt by us in our York workshop for perfect build quality every time and customisation through our choice of hubs and spoke nipples for the perfect fit with your bike.
The rim width is a massive 22mm internal, 30.5mm external optimised for best aerodynamic performance with tyres measuring around 25-27mm. The width allows for lower tyre pressures without increasing rolling resistance – we recommend 60-80psi for most riders.
The Mahi Mahi disk rim is the result of 3 years’ development with our rim supplier including several iterations of rim design to perfect the tubeless fit. With 15 years’ experience of building tubeless wheels it was important for us to use a rim which offers easy tubeless inflation and maximum tyre security as well as strength. The result is a semi-hooked sidewall design which fits tubed or tubeless tyres securely and easily and offers greater impact resistance than a standard hooked bead. Unlike hookless bead rims, the semi-hook bead is suitable for running tyre pressures up to 100psi with 25mm tubeless tyres (though we recommend lower pressure for better ride quality)
Long term reliability, strength and meticulous attention to detail is standard on every wheelset we build. At the heart of this is our JRA hubs, with variants to fit any bike but all sharing the same light weight, ultra smooth and durable TPI bearings and reliable 6-pawl double-sealed 48-point freehub design. Building all wheels by hand in-house means quality control is built-in to every wheel with each component being checked as the wheel is built so we can achieve very close to zero returns.
30mm rims are our lightest weight wheelset with good aerodynamic performance. These wheels are light for hill climbing but roll fast on the flat too.
40mm seems to be the sweet spot for most riders and with a weight of just 1433g per pair and almost totally unaffected by side-winds we recommend them for anyone.
50mm wheels are very fast with great aerodynamic performance at the expense of a bit more weight. These are the deepest rims normally used on standard road bikes.
hubs : JRA centre-lock Straight-pull hubs with laser etched JRA logo
rim : JRA Mahi mahi carbon rims, 24 hole front 24 hole rear with black water transfer decals
spokes : Sapim CX-Ray straight-pull black spokes
nipples : aluminium coloured nipples as listed
weight 30mm: Centre-Lock Straight-Pull pair 1361g (front 617g / rear 744g)
weight 40mm: Centre-Lock Straight-Pull pair 1442g (front 657g / rear 785g)
freehub: Shimano, Campagnolo or Sram XD freehubs