New '09 versions of the lightweight American Classic hubs, available in QR, 15 or 20mm front and QR rear. Extremely reliable ultra-lightweight hubs with large flanges for excellent wheel strength.

Front - Disc 130
American Classic say

"One of the lightest disc specific front hubs around without sacrificing stiffness and durability. Large 17mm front axle and stout 17mm stainless steel bearings resist fork flex. The hub shell is forged out of one solid piece of aluminum. Built-in stand offs on the disc mounts allow the rotor to mount flat and prevent warping while tightening. Double seal system to keep grit and dirt out of the bearings. The 130 has been thoroughly tested and carefully engineered to produce a front disc hub that is built to last."

Rear- Disc 225
American Classic say

"The time proven Disc 225 hub is stiff, strong, light and reliable. The strong, patented 6 pawl cam actuated engagement system handles the constant re-accelerations of XC. The large diameter 17mm axle is stiff. The big 19mm diameter serrated steel drive side end cap grips the frame. The flange spacing was designed for optimal dishing which is the balance point between wheel triangulation, spoke tension and lateral stiffness. Built-in stand offs on the disc mounts allow the rotor to mount flat and prevent warping while tightening. The hub shell supports the bearings as wide as possible for maximum leverage, to reduce the load on the bearings and stiffen the hub. This is one fast, quiet riding hub at 225 grams."

Cro-moly quick Releases included.
Weight of hubs: 130 grams front, 225g rear

New - 15mm and 20mm front hubs

Some of the lightest thru-axle hubs you'll find at just 116g for the 15mm and 216g for the 20mm, the hubs feature American Classic's patented sleeve technology and adjustable bearings to improve bearing life and performance.